When an Arduino UNO R3 or Mega 2560 R3 shows up as “ATmega16u2 DFU” or “Arduino Uno DFU” with a yellow triangle, its USB…
CH552, CH549, CH32V203/V307, CH582 and the other WCH chips with a factory USB bootloader all enumerate as 4348:55E0. WCH's WHQL CH375 driver vs WinUSB: what Device Manager shows, which driver WCHISPStudio, wchisp (release vs nightly), ch55xduino and chprog can open, and how to enter the bootloader family by family.
A CH347 is two or more USB devices, not one. The mode table (55DA to 55DE) with the Windows driver per interface, AsProgrammer dregmod v5 mirrored with its checksum, flashrom and OpenOCD support dates, the chip-revision JTAG problems, and the five failures in order.
The EZP2023+ package ships two driver folders and only one is signed for Windows 10/11: the other reuses the EZP2019+ catalogs, which hash a file that is not there. Both official archives with SHA-256, the install steps, the 896 vs 890-chip databases decoded, and the five failures from the forums with what the files say about each.
NodeMCU PyFlasher 5.1.0 for Windows, hosted here with SHA-256, plus the flash mode (DIO, QIO, DOUT) each ESP8266 and ESP32 board needs, and the common errors.
An unmodified black CH341A drives its data lines to about 4.5 V while the socket feeds the flash chip 3.3 V. Against the chip’s…
The official chip counts, the manual-by-manual capability table, and what a decade of changelog entries says each programmer was really built for.
Three XGecu programmers get compared endlessly on forums and almost always on one number: how many chips each one claims. That number is the…
minipro is the open-source command-line program that drives XGecu’s TL866-series chip programmers on Linux, macOS and BSD, and it is the only reason those…
Run install.bat with no argument on Windows and ESP-IDF v6.1 downloads 1,496 MB of toolchains. Type your chip after it — install.bat esp32 —…